Ts1162 Installation Manual Exclusive -

Observe the LED indicators. A solid green light indicates normal operation. A flashing red light indicates a fault or wiring error. 5.2 DIP Switch Settings

The TS1162 connects directly to the Challenger system’s LAN.

Verify that the input has been properly mapped in the Challenger panel and that the mapping matches the physical terminal it was landed on. 🔗 Actionable Resources & Next Steps ts1162 installation manual exclusive

When mounting the device, ensure:

: Features a dedicated Request to Exit (RTE) input and an open collector output for controlling door relays or strikes. Observe the LED indicators

Once the DST completes successfully, the status indicator LED on the front bezel will glow solid green. The TS1162 is now ready to handle production enterprise backups.

Thread the TS1162 into the port by hand until it seats. The exclusive manual requires that you feel resistance exactly at 1.5 turns after initial contact. If you feel resistance earlier, cross-threading has occurred. Once the DST completes successfully, the status indicator

Once powered, the TS1162 goes through an internal Power-On Self-Test (POST). Follow these steps to configure the system topology:

If your TS-1162 includes a stand: