Systec It3 User Manual Now

| Category | Specification | |:---|:---| | | Stainless steel, IP69K protection (IP65 for Ex version) | | Display | 5" (13 cm) TFT color, 800 x 480 pixels, backlit | | Keyboard | Numeric keypad, 5 softkeys, zero, tare, print | | Scale Connection | 1 or 2 analog scales, or digital load cells (optional) | | Excitation Voltage | For analog load cells, from the terminal | | Load Cell Impedance | 43 Ohm–3.3 kOhm (analog), 87.5 Ohm–3.3 kOhm (via Zener barriers) | | Resolution (W&M) | Up to 10,000 d (multi-range: 3 x 3000 d) | | Internal Resolution | 524,000 d | | Update Rate | 50–800 per second | | Power Supply | 110–240 V AC, 12–30 V DC, or battery option | | Interfaces | RS232, RS422, Ethernet, optional I/O, 4-20 mA, 0-10 VDC | | Fieldbus (Optional) | Profibus DP, Profinet IO, Ethernet/IP, Modbus TCP | | Dimensions (WxHxD) | 228 x 214 x 124 mm (approx.) | | Weight | Approx. 8 kg | | Temperature Range | -10°C to +40°C (operating) |

Press the Save/Exit function key. The terminal will calculate the calibration factor and return to normal weighing mode. 5. Software Applications and Operating Modes

Place a certified test weight onto the scale (ideally at least 10% to 100% of maximum capacity). systec it3 user manual

If your terminal displays an error, refer to these common solutions:

Optional modules for Profinet, Profibus DP, EtherNet/IP, and Modbus TCP. | Category | Specification | |:---|:---| | |

If you have more details about the Systec IT3 or its applications, I could potentially offer more targeted advice.

The IT3’s 8 digital inputs can be programmed as interrupt sources. The manual links to a code example in C++ that uses the library. This is critical for high-speed event counting in manufacturing lines. If you have more details about the Systec

Uses a stainless steel U-shaped bracket. Ensure the surface can support the vibration of industrial machinery.

One of the IT3's strongest features is its ability to store . The user manual provides a step-by-step flowchart for programming:

) via the diagnostic submenu. This helps isolate whether the issue lies in the terminal hardware or a physically damaged load cell. 6. Maintenance and Software Tools

Ensure you have selected the correct drying time (minimum 15 minutes for dense loads). Also, do not overload the chamber—the manual specifies maximum fill levels (e.g., 70% for textiles).