If you connect a cash drawer directly to the printer's RJ11 port: Navigate to > Device Settings . Find the Peripheral Unit Type option. Set it to Cash Drawer .
Incorrect wiring is the #1 cause of "driver not found" errors—not because the software is missing, but because the hardware is not communicating.
Windows 7, Windows 8, Windows 10, and Windows 11 (both 32-bit and 64-bit architectures). Windows Server: Windows Server 2008, 2012, 2016, and 2022. gp l80180 driver
The GP-L80180's default factory IP address is 192.168.123.100 . Your network's router likely uses a different subnet. Setting up the printer involves temporarily changing your computer's IP address to match the printer's subnet, using a software tool to change the printer's IP, and then installing the driver.
If you are connecting a controller board (e.g., an off-brand CNC shield with USB interface) that uses the GP L80180, follow these steps: If you connect a cash drawer directly to
The is a high-speed, 80mm thermal receipt printer commonly used in retail, hospitality, and kiosk environments. It supports multiple interfaces (USB, Serial RS232, Ethernet, and Parallel) and features automatic cutter, paper low sensor, and high-resolution printing (203 DPI). This document covers driver installation, configuration, and troubleshooting.
| Symptom | Solution | |---------|----------| | “Unknown USB device” | Uninstall ghost devices in Device Manager → Scan for hardware changes. | | Driver install fails | Disable antivirus temporarily; run installer as Admin. | | Printer offline | Check USB cable; try another port; restart Print Spooler service. | Incorrect wiring is the #1 cause of "driver
Download the GP-L80180-Drivers package from the Fangtek website. Extract the ZIP file to a folder on your desktop. 3. Run the Installer
POS software expects a specific printer name. Go to Control Panel → Devices and Printers → right-click GP L80180 → Printer Properties → Sharing → check "Render print jobs on client computers". Also, ensure the software’s port settings match (e.g., USB001 or LPT1).
If you are still facing errors after following this guide, isolate the problem: Test the motor with a known working driver. If it spins, your GP L80180 hardware is faulty. If not, re-check your power supply and software pulse settings.