This guide covers everything you need to know to set up your hardware, change IP addresses, and fix common connectivity issues using the v5.0 utility. 1. What is the GP Ethernet Printer Tool v5.0?
To permanently integrate the printer into your business network: Locate the section within the V5.0 tool.
: Facilitates test printing to ensure the new network settings are active and communicating correctly. TapTouch POS Key Usage Steps Preparation : Power on the printer and perform a gp ethernet printer tool v5.0
Enter the desired "Printer New IP Address" that fits your local network.
Look at the back of the printer where the Ethernet cable plugs in. If the green/amber lights are completely off, the cable is bad, or the port on your router is inactive. This guide covers everything you need to know
If you try to assign an IP that another device on your network is already using, the printer may reject the assignment. Unplug the printer, try to ping that IP from your computer, and verify that the slot is completely empty before assigning it.
Open the GPETHERNET application on your Windows PC. To permanently integrate the printer into your business
: Always use static IP addresses for receipt printers rather than dynamic DHCP. If a router restarts and changes a printer's IP, your POS software will lose connection.
Network receipt printers are the backbone of modern point-of-sale (POS) systems. However, configuring them can be a challenge. The is the official utility designed to simplify this process for Gprinter and compatible thermal receipt printers.
Temporarily set a manual static IP that matches the printer’s prefix (e.g., if the printer is 192.168.1.87 , set your PC to 192.168.1.100 ). Set the Subnet Mask to 255.255.255.0 . Click to save. Step 3: Operating the V5.0 Tool