SPI Nor Flash or SPI Nand Flash support for bootloader/firmware Core: 1.2V | I/O: 3.3V | DDR2: 1.8V Package Type LQFP128 (Low-profile Quad Flat Package, 128 pins) 3. Image Signal Processor (ISP) Features
: IMX322, IMX225 (delivering high sensitivity low-illumination targets). SmartSens Sensors : SC1035, SC1135, SC2035. Aptina / OmniVision / SOI : AR0130, OV9712, H42. Video Encoding and Streaming Engine
Example sensors listed in the datasheet: Sony IMX323, OmniVision OV2710, and SmartSens SC2135.
The SoC includes a built-in Image Signal Processor (ISP) with features such as: gk7102 datasheet
Up to 1.3-Megapixel (960P) or 1.0-Megapixel (720P) at 30fps.
: Supports full HD 1080p encoding, making it suitable for higher-resolution cameras than the GK7102. GK7102 : The base model, focused on 960p/720p encoding, often with 512Mb of integrated DDR2. GK7102C : An improved, lower-power variant running at approximately 500mW. It is a drop-in replacement with enhanced ISP. GK7102S : Similar to the GK7102 but with software optimizations and often used in more modern designs. GK7102C-A : A variant of the GK7102C that supports 1080p encoding and decoding. GK7102C-T : An RTOS-optimized version that requires only 4MB of Flash for operation.
It is important to note that . The manufacturer generally provides technical documentation under a Non-Disclosure Agreement (NDA) to qualified companies. This has led to the situation where the most authoritative information available comes from secondary sources, product announcements, and community research. SPI Nor Flash or SPI Nand Flash support
Search for specific camera models (like Wanscam or Digoo) that use this chip. What is your specific goal with this information? IoT: Pentest of a Connected Camera - SysDream
The boot process can be accessed via UART to force a custom firmware update from an SD card. Conclusion
The GK7102 is designed for , combining a processor, memory, and storage into one package. It is often used to bring 720p or 1080p video streams to Wi-Fi-enabled devices. Key Hardware Highlights: Aptina / OmniVision / SOI : AR0130, OV9712, H42
If you are currently debugging or building a firmware layout around a GK7102-based device, ensure you have cross-referenced your board layout against the exact pin multiplexing configurations outlined in the registers section of the official Goke technical documentation.
: Features a built-in Fast Ethernet PHY controller. It is frequently linked via external physical SDIO buses to standard 2.4GHz Wi-Fi chips such as the MediaTek MT7601 or Realtek RTL8188 components to enable wireless deployment.
: Features include UART serial interface, MicroSD/TF card support, and compatibility with standard Wi-Fi modules like the MediaTek MT7601 . Video & Audio Capabilities
: Manufactured on a highly efficient 40nm process node .