Din 5462 Spline Standard Pdf Exclusive [patched] 〈OFFICIAL ✓〉

: Its straight-sided design offers a simple, cost-effective method for transmitting high torque while allowing for axial movement when required. DIN DUMP PUMPS | Permco

The DIN 5462 standard specifies the dimensions, tolerances, and requirements for splines with a straight-sided or involute tooth profile. The standard covers splines with a module (m) range of 0.5 to 10 mm and a number of teeth (z) ranging from 6 to 100. The key features of DIN 5462 splines include:

standard, though it remains a critical reference for legacy equipment and specific industrial assemblies. DIN 5462 - ISO 14 - 1982 - Spline | PDF - Scribd

Features 6, 8, 10, or 20 keys . Also parallel-sided, but designed for heavy-duty machine tool applications requiring higher torque capacities than a 4-key configuration can provide. din 5462 spline standard pdf exclusive

When manufacturing or inspecting a DIN 5462 interface, the following geometric variables apply to ensure a standard sliding or interference fit: Nominal Dimension (mm) Tolerance Class (Typical) Minor Diameter (Shaft) g6 / h6 (Sliding fit) Major Diameter (Shaft) D1cap D sub 1 Tooth Width (Shaft) B1cap B sub 1 Minor Diameter (Hub) Major Diameter (Hub) D2cap D sub 2 Space Width (Hub) B2cap B sub 2

The preferred method for internal spline hubs. A multi-toothed broaching tool is pushed or pulled through a bored hole to cut the four precise slots in a single pass.

), though flank centering is sometimes used depending on the fit. Application : Heavily integrated with the : Its straight-sided design offers a simple, cost-effective

Originally developed for applications requiring a robust, non-self-centering spline connection—such as agricultural machinery, heavy-duty gearboxes, and universal joint shafts—DIN 5462 has been largely superseded in modern German engineering by DIN 5480 (involute). However, it remains where compatibility with older ISO standards is required.

Internal splines are primarily manufactured using a pull broach tool containing the progressive 8x32x36 geometry, or via slotting/shaping on CNC machinery for blind holes.

When a document is labeled "exclusive," it is not a marketing gimmick—it is a legal status. The legitimate version of the DIN 5462 standard is exclusively available through authorized distributors like: The key features of DIN 5462 splines include:

). This provides the highest concentricity and alignment accuracy.

standard specifies dimensions and tolerances for straight-sided (parallel) spline shaft connections, primarily the "Light Series". It is most commonly used in heavy-duty truck hydraulics for connecting pumps and motors to power take-offs (PTOs). Key Specifications & Dimensions The standard identifies profiles by a nomenclature of [Number of Teeth] x [Minor Diameter] x [Major Diameter] . The most ubiquitous size is 8 x 32 x 36 Nominal Dimension Number of Keys ( Minor Dia ( Major Dia ( Key Width ( 6 x 23 x 26 6 x 26 x 30 6 x 28 x 32 8 x 32 x 36 8 x 36 x 40 8 x 42 x 46 Data sourced from technical summaries at Technical Features Profile Type : Parallel (straight-sided) flanks rather than involute. : Primarily uses internal centering (on the minor diameter